Motivation
The formula uses a normal vector and second derivatives of a surface in space. Why should the result be determined by distances measured along the surface? The answer is a compatibility equation: the third mixed derivatives of a parametrization commute. Their tangential components express the determinant of the second form entirely through the metric and its derivatives.
A second compatibility calculation explains why curvature appears in a turning-angle theorem. An orthonormal frame rotates as we move across a patch. Its rotation is described by a one-form whose derivative is minus Gaussian curvature times area. Integrating that identity converts curvature into boundary turning. Summing over triangles then converts local boundary bookkeeping into Euler characteristic.
The geometric calculations below are proved. Their global use has named topological and analytic inputs: Stokes' theorem, the planar turning theorem, and a finite smooth triangulation subordinate to coordinate charts. We identify precisely where those inputs enter; their general existence and proofs are not silently included in this one note.
Definitions
Let be a regular patch whose coordinate order agrees with the chosen orientation, so . Write , , , and let be the inverse matrix. With unit normal , put . This agrees with the existing convention and .
Definition 3.3.1
(Covariant derivative and Christoffel symbols)
The covariant derivative is the tangential projection of the ambient derivative of a tangent vector field . The Christoffel symbols are the tangential coefficients in
Repeated indices are summed from one to two. In terms of the metric,
To verify the formula, differentiate the three inner products and combine them to obtain , then invert the metric matrix.
Definition 3.3.2
(Connection one-form of a frame)
For a positively oriented orthonormal tangent frame , the connection one-form is .
Since and , this gives and . In coordinates , and .
Definition 3.3.3
(Signed geodesic curvature and exterior turn)
A unit-speed curve with tangent has signed geodesic curvature . Boundary orientation keeps the region on the left. At a corner with interior angle , the signed exterior turn is , which may be negative.
Theorem/proposition
Theorem 3.3.4
(Metric Gauss equation and theorema egregium)
Define the metric expression
For the patch above,
Thus Gaussian curvature is determined by the first form and its first two derivatives. Any local isometry between such surfaces preserves .
Theorem 3.3.5
(Frame curvature and local holonomy)
For every positive orthonormal frame on the patch,
Parallel transport along a piecewise smooth curve is uniquely determined by its starting vector. Around a positively oriented simple boundary enclosing a disk inside the patch, it rotates that vector by modulo .
Theorem 3.3.6
(Gauss–Bonnet with explicit topological inputs)
Let be a compact oriented surface with piecewise regular boundary and finitely many noncuspidal corners. Assume a finite curvilinear triangulation whose closed faces lie in oriented coordinate patches and whose boundary vertices include all corners. Then
Here smooth added boundary vertices have zero turn. Identifying with gives the usual formula. The standard smooth-triangulation theorem supplies the stated triangulation in the usual surface setting; its proof is not given here.
Proof sketch or proof idea
Proof
(Commuting third derivatives give the Gauss equation)
Differentiate to get . Compare the tangential coefficients in . Differentiating the decomposition shows that the coefficient of on the first side is
Subtract the expression with interchanged. Equality of mixed derivatives yields
Set and contract with . The result is . Since is symmetric, division by gives the claimed curvature formula. It uses only and their derivatives. A local isometry lets us use the same coordinates on its source and target with identical first-form coefficients; the two expressions therefore agree. This proves the intrinsic claim, rather than inferring it merely from examples of flattened cylinders.
Proof X-ray
How an extrinsic calculation produces an intrinsic answer
The calculation splits each third derivative into tangential and normal parts and keeps only the coefficient of . Two kinds of terms appear. Differentiating the tangential part of produces the derivatives and products of Christoffel symbols; differentiating its normal part produces , through . Equality of mixed partials then forces the antisymmetrized Christoffel expression to equal a minor of . The second form enters only through this determinant, which is why is intrinsic while the individual , and hence , are not.
The frame identity uses the same idea, applied to the derivatives of a frame instead of a parametrization.
Proof
(Frame rotation and transport angles)
For the frame identity, use a positive orthonormal frame obtained, for example, by Gram–Schmidt from . Write and . Orthogonality gives
Taking the component of yields
The rows are the second-form evaluations of against the orthonormal frame. Explicitly, write . The row matrix has determinant because both bases are positively oriented, and the evaluation matrix is times the orthonormal matrix of the second form. Its determinant is therefore . This proves .
Write a unit tangent field along a curve as , choosing a continuous angle lift on each smooth arc. Differentiation gives
For a transported vector the angle instead satisfies ; integration gives its unique angle from its initial value. Lengths and angles between transported vectors remain constant. For a closed loop the frame returns to the same value, so its transport rotation is modulo , by Stokes. The modulo qualification matters: a full turn returns the vector to itself.
The global formula is assembled from the local disk formula.
Proof
(Disk formula and triangulation bookkeeping)
For a disk in a chart, the planar turning theorem gives
relative to any positive frame extending over . The usual coordinate tangent has turning number one. Changing to an extending frame contributes zero additional winding: its positive frame-change matrix extends over the disk, so its boundary rotation has winding zero. This is the moving-frame version of the planar theorem; that elementary turning theorem is an explicit input here. Integrating the preceding curvature identity and applying Stokes now gives
Thus the local disk formula is proved from the named turning and Stokes inputs.
Apply it to every face of the stipulated triangulation. Integrals on interior edges cancel because their two induced traversal directions are opposite; signed geodesic curvature reverses with traversal. Writing each triangle's exterior turns as minus its interior angles gives
At an interior vertex the face angles sum to . At a boundary vertex they sum to the region's interior angle . Adding its boundary turn therefore leaves a total
Finally and , because boundary edges form polygonal cycles. Substituting into gives exactly that expression. This completes the global bookkeeping. For a closed surface the boundary counts vanish; the same calculation uses . Existence of the finite chart-compatible triangulation, not the summation argument, is the remaining topological input.
Proof X-ray
Which input closes which step
The proof has four transitions, and each uses a different input. Commuting frame derivatives, a pure calculation, gives . Stokes' theorem, applied on a disk over which the frame extends, turns the curvature integral into . The planar turning theorem supplies the constant , and the key move is the formula : it splits boundary curvature into the turning of the angle, which is topological, and , which Stokes converts into curvature. Finally the chart-compatible triangulation makes interior edge integrals cancel, because changes sign with traversal, and leaves only vertex angles, which the counts and turn into . If the frame does not extend over the disk, as for the radial frame on an annulus, the Stokes step fails; if the surface is not compact, there is no finite triangulation to sum over.
The compactness hypothesis is not decorative.
Counterexample mode
Gauss–Bonnet fails on an open disk
Claim: every oriented surface without boundary satisfies . Let be the open unit disk in the plane. Then , so , while is contractible and , so the right side is . The hypothesis that fails is compactness: has no finite triangulation by closed faces lying in . For the compact closed disk the boundary term restores the formula: the unit circle has and length , so .
Worked examples
Worked example 3.3.7
(Flat polar coordinates still have nonzero Christoffel symbols)
For , the nonzero symbols are and . The metric curvature component is
Thus . The derivative and quadratic terms both matter: a nonzero Christoffel symbol alone does not measure curvature. The coordinates require and a local angle interval; their failure at the origin is a chart failure.
Worked example 3.3.8
(A whole family of curvature calculations)
For with and twice continuously differentiable, the only nonzero symbols are and . Substitution gives , so
For sphere meridian arc length, and , giving . A cylinder has constant and curvature zero; polar plane coordinates have and also give zero. This computes intrinsic curvature even for an abstract positive metric; it does not assert a global embedding in for every chosen .
Worked example 3.3.9
(Spherical excess now follows from the local proof)
A simple geodesic triangle on a radius- sphere bounds a chosen disk, with interior angles . Its sides contribute zero geodesic curvature and its corners contribute . The disk formula therefore yields
Choose a coordinate patch omitting a point outside that disk, so the local proof applies. The formula concerns the chosen disk and its corresponding angles, not an unspecified one of the regions cut out by three great circles.
Worked example 3.3.10
(Cancellation on a standard torus)
For the standard torus with radii , earlier calculations gave and . Thus
The triangulated formula agrees with . It does not force to vanish pointwise: positive and negative regions cancel. On a sphere the corresponding integral is , independent of radius, because curvature scales inversely to area.
Common mistakes
Common mistake
(Mixing sign conventions for the connection form)
Changing the convention for the connection form changes the sign in its curvature identity. Here , so and . Use these two formulas together rather than combining signs from different conventions.
Common mistake
(Treating mean curvature as intrinsic)
Metric curvature is intrinsic; mean curvature is not. Plane and cylinder patches can have the same metric but different mean curvatures, so no metric calculation can produce .
Common mistake
(Using unsigned curvature on the boundary)
Boundary curvature is signed geodesic curvature, not the unsigned space curvature of a boundary curve. A great circle on a sphere has space curvature but . At reflex corners the exterior turn is negative. Omitting these signs breaks the triangulation cancellation.
Summary
Gaussian curvature is forced by metric compatibility, rather than merely appearing intrinsic in examples. Frame rotation yields a local curvature two-form and parallel-transport holonomy. With explicitly named turning, Stokes and triangulation inputs, local disk formulas sum to the full boundary-and-corner Gauss–Bonnet identity.
Exercises
Quick check
(For , compute the intrinsic curvature when . What embedding claim has not been proved?)
Solution · Answer
Since , the expression is . This is a computation for the positive metric. It neither constructs an immersion realizing that metric nor proves a complete global isometric embedding in Euclidean three-space.
Quick check
(Derive the curvature formula for a conformal metric , and apply it to on .)
Solution
Writing for derivatives, the nonzero candidates are , , , , , . In the quadratic terms cancel, leaving . Since and ,
For , the Laplacian is and , so .
Quick check
(Find the parallel-transport rotation around a positively oriented spherical disk of area on the radius- sphere, assuming the disk lies in a patch. What changes on reversing the loop?)
Solution · Answer
The rotation is modulo . Reversing the traversal reverses the signed curvature integral, so the rotation becomes modulo . Equality to zero modulo does not require the disk's curvature integral to be zero as a real number.
Quick check
(Can a disk of positive area in a surface with constant curvature have a simple geodesic quadrilateral boundary with four right interior angles?)
Solution · Answer
No. For a geodesic disk polygon with sides, the formula gives . Four right angles make the right side zero, whereas constant curvature makes the left side the negative of a positive area. The contradiction excludes such a simple quadrilateral bounding a disk.
Quick check
(If a closed surface has Euler characteristic zero and continuous , prove that vanishes everywhere, using the stipulated triangulation hypothesis.)
Solution · Answer
Gauss–Bonnet gives . If , continuity gives a small regular patch on which has a positive lower bound. That patch has positive area, making the nonnegative total integral strictly positive, a contradiction. Hence everywhere. No classification of closed surfaces or existence of a Euclidean embedding is inferred from this conclusion.