Let be a connected oriented smooth surface without boundary, with its induced metric and Levi–Civita connection. Read the intrinsic-curvature frame identity, linear ODE reconstruction and the topology chapters on paths and fundamental groups. Completeness is not assumed. We prove the global statements here rather than assuming that zero curvature makes all transport independent of paths.
Motivation
A tangent vector lives in one tangent plane. Comparing vectors at different points requires a rule, and parallel transport supplies one along a chosen path. Local formulas already explain the rule inside a chart, but a path can cross many charts and a loop can surround a missing region.
Zero curvature removes a local obstruction. It does not necessarily remove the effect of going around a hole. A cone with its vertex removed is flat at every point, yet transport once around it can rotate a vector. Conversely, a cylinder is flat and has trivial transport around every loop despite being nonsimply connected. The right global datum is a rotation assigned to each homotopy class, not the presence or absence of holes alone.
Definitions
Definition 6.1.1
(Parallel field and transport map)
Let be a piecewise smooth path. A continuous tangent field along is parallel if on each smooth piece. The transport map sends the initial value of a parallel field to its final value. Pauses are allowed: need not be regular.
Two operations on paths recur below. The reversal is , and means traverse first, then .
Definition 6.1.2
(Connection form, parallel frame and flatness)
In a positive orthonormal frame on an open set, the connection form is ; earlier we proved . A frame is parallel when both its fields have zero covariant derivative in every direction; in this dimension that is equivalent to . The surface is flat when everywhere.
Rotating the frame by an angle function means
and direct differentiation gives . This rule is how a flat frame will be built.
Definition 6.1.3
(Holonomy of a based loop)
Transport around a loop based at is an orientation-preserving linear isometry of , hence a rotation. This rotation is the holonomy of the loop.
We will prove that for a flat surface the holonomy depends only on the ordinary endpoint-fixed homotopy class. For curved surfaces it generally does not.
Theorem/proposition
Theorem 6.1.4
(Transport is globally well defined along paths)
Every piecewise smooth path has a unique parallel field with any prescribed initial vector. Its transport is a linear orientation-preserving isometry, invariant under increasing piecewise smooth reparametrization, with
The construction is independent of the charts used to solve the equations.
Theorem 6.1.5
(Flatness gives local parallel frames and homotopy invariance)
if and only if every point has a positive orthonormal parallel frame on a neighborhood. On a flat surface transport extends canonically to continuous paths and is unchanged by continuous endpoint-fixed homotopies. Thus based-loop transport defines
With our path convention it composes in the reverse order of map composition; since rotations in an oriented plane commute, it is also a group homomorphism with the usual rotation multiplication.
Theorem 6.1.6
(The obstruction to a global parallel frame)
A connected oriented flat surface has a global positive orthonormal parallel frame if and only if every based-loop transport at one point is the identity. In particular every simply connected oriented flat surface has such a frame. A global parallel frame does not by itself supply a single global Euclidean coordinate chart.
Proof sketch or proof idea
Proof
(Gluing chart solutions into one transport)
In coordinates, the parallel equation is the linear system
On a compact smooth path piece inside a chart, coefficients are continuous and bounded. The linear integral equation has a solution on the entire piece: successive substitutions have factorially bounded tails, and the same integral estimate proves uniqueness. Cover the compact parameter interval by finitely many chart intervals and solve in succession, retaining the endpoint vector at each join. Tangential projection of the ambient derivative is coordinate invariant, so in an overlap both coordinate solutions solve the same equation. Uniqueness identifies them. Refining a partition therefore changes nothing.
The metric product rule gives for parallel fields. Linear ODE uniqueness gives linearity, and reversal supplies the inverse. Starting from a positive orthonormal pair, its orientation cannot change continuously without losing independence. Thus transport is orientation preserving. Gluing solutions proves the composition formula. The chain rule proves reparametrization invariance, including zero-speed pauses.
The second theorem needs a different tool: instead of solving along one path, we build frames in which transport is trivial.
Proof
(Flat frames and the grid argument)
Assume and choose a rectangular coordinate neighborhood with a positive orthonormal frame. Write . The curvature identity says . Fix and define
The fundamental theorem of calculus gives , and differentiation followed by gives . Thus . Rotate by ; the new connection form vanishes, so the new frame is parallel. Conversely a parallel local frame gives , hence because the area form is nonzero.
Within such a parallel frame, transport keeps both vector components constant and depends only on the two endpoints. Two parallel frames on an overlap differ by a rotation whose differential vanishes, so their transition is constant on each connected component; differentiating their inner products, all of whose derivatives vanish, shows the same.
For a continuous path choose a finite partition so each subpath lies in one parallel-frame neighborhood. Define transport there by constant components, and compose. This definition does not differentiate the path. Refinement preserves it. Given two choices, refine both partitions simultaneously; on each refined subpath their frames overlap, and its connected image lies in a component where the transition matrix is constant. The two endpoint maps agree. This proves independence and agreement with the original ODE transport on piecewise smooth paths.
For a continuous homotopy , take the inverse-image open cover of the square by parallel-frame neighborhoods and its Lebesgue number; a rectangular grid finer than that number has each closed little rectangle mapped into one parallel-frame neighborhood. Along one cell, the transport along its lower then right edges equals that along its left then upper edges: both are the same constant-component endpoint map in one frame. Assign a vector to grid vertices along monotone grid paths; the cell identity makes the result independent of elementary exchanges, and every two monotone paths are connected by these exchanges. Therefore transport along the bottom followed by the right boundary equals that along the left boundary followed by the top. For an endpoint-fixed homotopy the two vertical boundaries are constant paths, so bottom and top transports agree. This covers continuous homotopies without importing a smoothing theorem.
Consequently the flat-loop rotation depends only on the class in . The composition formula proves the asserted representation convention; a different positive starting basis conjugates the matrices, and in this conjugation changes nothing. Changing the base point identifies the tangent planes by transport along a connecting path and conjugates the corresponding loop maps.
Proof X-ray
Where flatness enters the grid argument
Flatness is used exactly once: on a rectangle, makes exact, so a rotated frame is parallel. Everything after that is topology. The Lebesgue number fits every cell of the grid inside one such patch, and the key move is the cell identity, which holds because both routes around a cell are the same constant-component map. Elementary exchanges then slide the bottom-right route to the left-top route, and the argument closes because an endpoint-fixed homotopy has constant side edges. Without flatness the cell identity fails: on a sphere a small cell contributes the rotation , so exchanges change the answer. Without a homotopy there is no grid at all, which is why a loop around the cone vertex escapes the argument.
The third theorem turns trivial holonomy into a global frame.
Proof
(Transporting one basis everywhere)
Suppose all based loops at transport trivially. Every point can be joined to by a piecewise smooth path: the set reachable this way is open, and its complement is open by coordinate balls, so connectedness makes it all of . Transport a fixed positive orthonormal basis at to . Any two choices give the same answer, because following one and reversing the other is a based loop; inverses and composition then give equal endpoint maps.
The resulting fields are smooth and parallel. Near a point choose a parallel local frame. Reach by a fixed path and then reach neighboring points within that patch; the transported fields have constant components in that frame. This proves both regularity and zero covariant derivative. Conversely a global parallel frame keeps components constant along every path, so every loop transport is the identity. On a simply connected flat surface, homotopy invariance gives that identity, proving the final existence statement.
The standing hypothesis that is oriented is what puts the holonomy in ; the next example shows it cannot be dropped.
Counterexample mode
A flat Möbius band has a reflection as holonomy
Claim: on any flat surface, transport around a loop is a rotation. Let , an isometry of the Euclidean plane, and let , the open Möbius band with its flat metric. Take the core loop . In the plane, the constant fields and along are parallel. At the point , and a vector there corresponds to at . Since , transport sends and . This map has determinant : it is a reflection, not a rotation, and the band has no global parallel frame. Without orientation, flat holonomy still depends only on the homotopy class, but it takes values in the orthogonal group .
Worked examples
Worked example 6.1.7
(A flat cone has nontrivial global rotation)
For , parametrize the cone without its vertex by
Its metric is . The globally defined positive orthonormal frame , has : direct differentiation gives the component of equal to , with radial component zero. Hence and . Around one positively traversed circle, the transported angle satisfies , or equivalently modulo . For this is a half-turn. There is no contradiction with flatness: the missing vertex prevents contraction of that circle.
Concept lensGeometric
Holonomy as the angle missing from an unrolled cone
Cut the cone along the ray . The map with is an isometry onto the planar sector of opening angle , so parallel fields there are constant Euclidean vectors. Regluing identifies the two edges of the sector by the rotation through . Measured against the radial direction, a constant vector carried across the sector therefore loses the angle , and once around the cone it returns rotated by , that is, by the angle deficit of the sector. This recovers without computing .
Worked example 6.1.8
(A cylinder has a parallel frame but no global planar coordinates)
For take and , choosing the induced orientation of this frame. The ambient derivative of is normal and the other derivatives vanish. Thus both fields are parallel and all loop transports are identities.
Their dual one-forms are and . The first is globally defined but has integral around a circle, so it cannot be the differential of a globally defined real function. No rotating constant combination can make both dual forms exact: the vector of their two periods is nonzero and remains nonzero under rotation. A Euclidean isometric coordinate map would have parallel Cartesian gradients and thus such a constant rotated parallel frame; it would require both forms exact. So a global parallel frame alone does not unwrap the cylinder into one planar coordinate chart.
Worked example 6.1.9
(A contractible spherical loop can rotate vectors)
On a sphere of radius , take the triangle bounded by two meridians a right angle apart and the intervening quarter equator. It bounds an octant of area and lies in a coordinate disk containing its closure. The established curvature/holonomy identity gives rotation modulo . This loop is contractible on the sphere, but its transport is not the identity. Thus on curved surfaces transport does not generally descend to the ordinary fundamental group. Simple connectivity alone is insufficient.
Common mistakes
Common mistake
(Flat does not mean globally parallel)
Zero Gaussian curvature gives local parallel frames, not necessarily one global parallel frame. The cone separates those claims; the cylinder separates global frames from global exact coordinate functions.
Common mistake
(Transport angles live modulo )
A transport angle is a class modulo . An integral of produces the identity rotation while remaining a nonzero real integral. Changing a frame by a circle-valued rotation around a loop can change its connection integral by an integer multiple of ; the transport rotation remains unchanged.
Common mistake
(Using the grid argument on a curved surface)
The homotopy proof is for flat surfaces. Applying it to a sphere would erase the very curvature term measured by local holonomy. No completeness or global embedding conclusion is hidden in the frame theorem either.
Summary
Linear ODE uniqueness glues transport across charts. Flatness gives exact local connection forms and parallel frames; these extend transport to continuous paths and let a grid prove homotopy invariance. The resulting loop rotations are precisely the obstruction to a global parallel frame. Integrating that frame into global coordinate functions requires additional period information.
Exercises
Quick check
(If the cone parameter is in lowest positive terms, determine the order of its once-around holonomy. What happens for irrational ?)
Solution · Answer
The rotation is modulo . Its th power is the identity exactly when is an integer; since this happens first at . For irrational no positive multiple is an integer, so the holonomy has infinite order and its powers form an infinite group. This computes the order; it makes no further claim about density of that image in .
Quick check
(Explain why the punctured Euclidean plane has trivial holonomy despite a nontrivial fundamental group.)
Solution · Answer
The two constant ambient coordinate vector fields restricted to the punctured plane form a global parallel frame. Every path retains its components, so every loop has identity transport. Nontrivial topology permits holonomy but does not force it.
Quick check
(Rotate a frame by a globally real-valued function . Prove that a loop's transport rotation is unchanged. Explain the modification for an angle defined only modulo .)
Solution · Answer
The connection changes to , and the integral of around a loop is zero by the chain rule and equal endpoint values. For a circle-valued angle choose a real lift along the loop; its endpoint difference is . The integral changes by , leaving the rotation modulo unchanged.
Quick check
(On the cone's covering coordinates , construct a parallel frame and a local Euclidean isometry explicitly. Why do these fail to descend unchanged after increases by when ?)
Solution · Answer
Rotate the cone frame by ; then . The map has pullback metric and nonzero Jacobian , so it is a local isometry. Under the frame has rotated by relative to the periodic cone frame, and has rotated by . Neither is unchanged for . The local isometry need not be globally injective even on this universal covering domain.
Quick check
(Show that the dual forms of a global parallel frame are closed, using the torsion-free identity. Why does closed not imply exact on the cylinder?)
Solution · Answer
For a parallel field with dual form , the product rule gives . Torsion freeness follows from the symmetric Christoffel symbols already derived. On the cylinder the first form is closed but its circle integral is , while every exact differential has zero integral around a loop. The nonzero period is the obstruction.