Learning goals and method selection
Recognize inner-derivative substitutions, choose parts to reduce complexity, handle rational functions and radicals, and establish improper convergence before using a numerical answer.
On a connected interval, two differentiable antiderivatives of the same function differ by a constant, by the mean value theorem applied to their difference. On a disconnected domain, the constants on different components are independent. For example has primitive on and on ; there is no reason to set .
Proposition: substitution and its domain
If on an interval and is differentiable with values in it, then . Thus on each connected interval where the formula is valid. For a continuously differentiable on and continuous on its image,
Proof. The first formula is the chain rule. Applying the fundamental theorem to both sides with primitive proves the definite formula, including decreasing or nonmonotone . In contrast, transforming a more general integrand by an inverse substitution requires a valid branch and any needed interval splitting.
Worked examples
Two methods, one answer. For , division gives , hence . Alternatively set so , giving . These answers differ by , absorbed into the integration constant. All real are permitted because .
Parts with a definite endpoint. Let . Set and . Then
Since , the remaining integral is . Therefore . Every integrand is continuous on the finite interval, so there is no improper endpoint to justify.
A tail estimate rather than an elementary primitive. For , since . Thus converges by comparison. For any , its tail after is at most . No elementary antiderivative is needed. The estimate controls this tail only; it would not address an unrelated singularity at a different endpoint.
Independent singularities. The integral is not zero as an improper integral. Splitting at zero gives two divergent one-sided integrals. The symmetric truncated integrals vanish, but their limit is a Cauchy principal value, a different notion. The ordinary definition does not permit cancellation between divergent pieces.
Graded practice
- Foundation. Evaluate and verify by differentiation.
- Core. Evaluate .
- Core. Decide whether converges. Identify separately the finite endpoint and the infinite tail.
- Proof. Let be continuous on and satisfy there for . Prove convergence of its improper integral and bound the tail after .
Full solutions
- Set , giving . Differentiating gives as required.
- With , the integral is .
- The integrand is continuous at zero, so the finite endpoint is harmless. At the upper limit an antiderivative is , which tends to infinity. The improper integral diverges to despite smoothness everywhere on its finite domain.
- Absolute comparison gives . More specifically the integral between any has absolute value at most , tending to zero as . The Cauchy criterion for the real limit of finite integrals therefore establishes convergence, and passage to the tail limit gives . Continuity ensures all finite integrals exist.
Summary and term definitions
A primitive is an antiderivative on a stated interval. A tail bound controls omitted integration beyond a cutoff. Absolute convergence means integrability of the absolute value; it implies ordinary improper convergence by the Cauchy criterion. A principal value is a specified symmetric limiting process, not the ordinary improper integral. Method choice, domain validity and convergence are three distinct checks.
Proofs supporting the methods used in this note
Finite real limit laws and geometric sequences: the missing proofs
Work over the ordered real numbers, with the Archimedean property, positive-integer induction and the usual absolute-value triangle inequality. A sequence converges to a finite real when every admits an that works for every .
Uniqueness, boundedness and subsequences. If and , require both errors below at the same sufficiently large index. The triangle inequality gives , a contradiction. For boundedness, require in the tail, and take a maximum of and the finitely many initial absolute values. For a subsequence , induction gives ; hence every tail threshold for the original sequence also works eventually for the subsequence.
Sum, scalar and product. If , , choose both input errors below ; then
For a fixed scalar use input tolerance ; is immediate. Choose bounding all . Require
The common later threshold gives .
Reciprocal and quotient. If , first require , ensuring and nonzero denominators. Then
Requiring also proves reciprocal convergence. The product law now proves . Any undefined initial quotients may be omitted; convergence is a tail assertion.
Order and squeeze. If eventually and , , then : otherwise errors below would force . If eventually and both outer limits are , require both errors below . Then , proving . This proof does not require a previously known limit of .
For the corresponding function-limit laws, fix a common allowed approach domain and an accumulation point of : every punctured neighborhood of contains a point of . Let have the stated finite relative-domain limits at . Replace each tail threshold in the displayed estimates by a punctured-domain radius, and take the minimum of finitely many positive radii. For the product proof only local boundedness is needed: gives on a sufficiently small punctured -neighborhood, even if is unbounded elsewhere on . The same estimates prove sum, scalar, product, reciprocal and quotient laws with their stated nonzero limiting-denominator condition; the same order and squeeze estimates apply on the common approach domain. Accumulation supplies actual points when proving uniqueness or excluding an incompatible order of limiting values.
For composition let , let , and let be continuous at relative to . Suppose tends to and throughout some sufficiently small punctured -neighborhood of . Given , continuity supplies such that and imply . The limit of and the composition-domain condition supply a common positive radius forcing both conditions for every allowed approaching . Thus . This includes inputs with and does not divide by an inner increment.
Geometric classification. Bernoulli's bound for follows by induction: multiply the case by the positive and retain the nonnegative remainder . If , set . Thus
For any requested tolerance, the Archimedean property supplies making the right side smaller. Hence for by ; gives zero for every positive index. At the sequence is constantly one. At , the even and odd subsequences are one and minus one, so uniqueness and subsequence inheritance exclude convergence. If , Bernoulli with gives . If , by the same argument, contradicting boundedness of any convergent real sequence. These cases exhaust all real ratios.
Learning goals and definitions
Develop the proof behind integrability statements and distinguish boundedness from integrability. Let and be bounded on . For a partition , put , , and define , . The lower integral is the supremum of all lower sums; the upper integral is the infimum of all upper sums. Refining a partition makes lower sums nondecreasing and upper sums nonincreasing.
For any two partitions , their common refinement gives , so . Boundedness ensures these quantities are finite. The function is Riemann integrable when they agree.
Theorem: Darboux criterion
The bounded function is integrable if and only if for every there is a partition with .
Proof. If the two integrals equal , choose a lower sum above and an upper sum below , using supremum and infimum approximation. Their common refinement has gap less than . Conversely the inequalities force the integral gap to be zero when such partitions exist for every positive .
Bounded proper Riemann integrals: mesh equivalence and elementary properties
Let be finite, and let be bounded. For a partition , write for the lower and upper Darboux sums. We use real completeness and the proved Darboux criterion: equality of lower and upper integrals is equivalent to arbitrarily small . This packet does not assume continuity of .
Darboux implies every fine tagged sum converges. Let the Darboux integral be . Given , choose a fixed partition with gap below . Choose with , and let be the number of interior partition points of . For any other partition , mark as bad every cell whose closure contains one of those points. Their total length is at most , because each point belongs to at most two cells. Every remaining cell lies within a single cell. The contribution of all good cells to the oscillation sum is at most the gap for ; the bad cells contribute at most . Thus
Take . Every tagged sum and lie between and , so , independently of tags.
The converse. Suppose all sufficiently fine tagged sums are within of a common finite . Fix one such fine partition. Each cell supremum and infimum can be approximated by actual function values with error below . The resulting upper-approximating tagged sum exceeds , and the lower-approximating sum is below . Therefore and . Since can be arbitrarily small, the Darboux criterion gives integrability. Lower and upper bounds on tagged sums then identify its integral as . Suprema need not be attained for this argument.
Linearity, constants and order. For integrable and real , on any common tagged partition the exact finite identity is . Its limit exists, so the equivalence just proved gives integrability and the corresponding linear integral identity. The constant function has every sum equal to . If , their tagged sums with the same tags obey the same order; their limits do too. Consequently whenever .
Absolute values. The reverse triangle inequality gives on every cell : apply and approximate the suprema/infima. Thus every Darboux gap for is at most the gap for , and is integrable. Since , order and linearity give .
Restriction and interval addition. For , refine any small-gap partition by . The nonnegative gaps on and sum to the refined whole gap; each can therefore be arbitrarily small. Both restrictions are integrable. Join partitions of the two pieces with meshes tending to zero. The exact sum on the joined partition is the sum of the two tagged sums, so passage to their three limits gives . Conversely, if both restrictions are bounded integrable, join two partitions with gaps below ; the resulting whole gap is below , proving whole integrability and the same identity. At a shared endpoint both restrictions use the same value of ; no endpoint term has positive interval length. Set equal-bound integrals to zero and reversed-bound integrals to the negative. Splitting a finite interval and cancellation now extend addition to every ordering of its three endpoints.
These proofs justify the estimates used in accumulation, continuous FTC, integration by parts and proper substitution. They assert bounded proper Riemann statements only, and do not replace the separate convergence definitions at singularities or infinite endpoints.
Subsequences
Definition
Subsequence
A subsequence of is where are positive integers. If , then every subsequence converges to because and therefore eventually lies beyond any prescribed index.
Theorem
Bolzano–Weierstrass
Every bounded real sequence has a convergent subsequence.
Proof
Nested-interval proof
Place every term in a closed bounded interval . Bisect it. At least one half contains infinitely many terms; choose that half as . Continue, obtaining nested closed intervals of lengths tending to zero, each containing infinitely many terms. Choose indices strictly increasing with ; this is possible because each interval contains infinitely many terms. Completeness gives a common point in all intervals: the supremum of their left endpoints lies in each interval because every left endpoint is at most every right endpoint. Since , their distance is at most the interval length and tends to zero.
The conclusion is about a subsequence, not necessarily the whole sequence. For example, has constant subsequences converging to and , but does not converge.
Real closed sets: the sequence criterion and the open complement
Work on the real line in the usual classical set-theoretic setting, with countable witness selections available. A set is open when every in has some with contained in . We use the Archimedean consequence that tends to zero. For every subset of the real line, the following conditions are equivalent:
- Every sequence of points of that converges in the real line has its limit in .
- The complement of is open.
Proof of 2 implies 1. Suppose belongs to and tends to . If were outside , openness would give with disjoint from . Convergence gives a threshold after which , contradicting in . Therefore belongs to .
Proof of 1 implies 2. Fix outside . If no positive-radius interval around avoided , then for every positive integer there would be a point in with . Choose these witnesses as a sequence. Given , choose with . For , , so tends to . Condition 1 would force into , a contradiction. Hence some interval around avoids . This holds for every point of the complement, proving it open. The witness-sequence step uses the stated classical setting; this proof is not offered as a theorem about choice-free foundations. If is empty there is no sequence in , and its complement is the whole open line. If is the whole line, its empty complement is open vacuously. Both edge cases also satisfy the equivalence.
Learning goals and definitions
A set is compact if every family of open sets whose union contains has a finite subfamily still covering . A set is closed if it contains all limits of convergent sequences of its points, equivalently if its complement is open. Sequential compactness means every sequence in has a subsequence converging to a member of .
The empty set is compact, closed and bounded, and sequentially compact vacuously. In proofs using a selected point or an infinite sequence, treat that case separately. We may assume the real completeness property and its nested-interval and Bolzano–Weierstrass consequences from the earlier sequence units.
Theorem: Heine–Borel in the real line
For , the following are equivalent: compactness by open covers; closedness and boundedness; sequential compactness.
Compact implies closed and bounded. The intervals , , cover , hence . A finite subcover gives a bound. To show closedness, take . For each , the interval avoids . A finite subfamily covers . Let be the minimum of their positive half-distances to . Every point in the chosen interval centered at has distance from strictly greater than . Thus misses , showing its complement open. If is empty this is immediate.
Closed and bounded implies compact. Enclose nonempty in a closed bounded interval . Suppose an open cover of has no finite subcover. Bisect . At least one closed half meets in a set not finitely coverable; otherwise two finite collections would cover . Choose such a half and repeat. We obtain nested closed intervals with lengths tending to zero, and not finitely coverable. Each intersection is nonempty; choose . The nested-interval property gives a unique common point , and because both lie in . Closedness gives . Some member of the cover contains , and openness gives a ball around inside . For large , the whole interval lies in that ball, so alone covers , a contradiction.
Closed and bounded implies sequentially compact. Every sequence in is bounded, so Bolzano–Weierstrass supplies a convergent subsequence. Closedness retains its limit in .
Sequentially compact implies closed and bounded. If unbounded, choose with ; no subsequence can converge to a finite real number, a contradiction. If is a limit of points in , choose with . A subsequence converges to a point of by sequential compactness, but it also converges to ; uniqueness of real limits gives . Thus is closed. This completes all implications.
Fix an integer and the Euclidean norm on . A set is bounded if it lies in some finite-radius ball, closed if its complement is open, and compact if every cover by open subsets of has a finite subcover. We use real completeness, including the nested closed interval property.
Heine–Borel in finite-dimensional Euclidean space
Theorem. A set is compact if and only if it is closed and bounded. The empty set satisfies all three properties.
Compact implies bounded. The open balls , an integer, cover . A finite subcover puts inside the largest of these balls.
Compact implies closed. Suppose and . The balls , , cover . Choose a finite subcover with centers and set . If lies in the ball centered at , the triangle inequality gives . Hence misses , so the complement is open.
Closed and bounded implies compact. Let nonempty be closed and bounded. Enclose it in a closed cube with . Suppose an open cover of has no finite subcover. Divide each coordinate interval into two closed halves. The resulting closed subcubes cover . At least one subcube has intersection with that is not finitely coverable by the given family; otherwise the finite union of the finite subcovers would cover . Select such a subcube and repeat. This produces nested closed cubes with side length and not finitely coverable, hence nonempty.
For each coordinate, the nested interval property gives a common coordinate value. Together these give . Every pair of points in has distance at most , so the intersection contains only . Choose . Then . A closed set contains such a limit: if were in its open complement, a ball around would eventually contain outside , a contradiction. Thus .
One member of the cover contains , and openness gives for some . For sufficiently large , every point of is within of , so alone covers . This contradicts the selection of . Therefore every open cover has a finite subcover. The number is finite; replacing it by infinitely many subpieces would invalidate this argument.
Continuous images and extreme values
Theorem. If is compact and is continuous relative to , then is compact. In particular, a continuous on nonempty compact is bounded and attains its maximum and minimum.
Proof. An open cover of pulls back to relatively open sets , with open in . These cover , so finitely many suffice. Their corresponding cover , proving compactness. For scalar , the image is nonempty, closed and bounded by the theorem already proved in dimension one. Let . For each , the definition of supremum supplies with . Then , and closedness places in the image. Thus the maximum is attained. Applying the same argument to gives the minimum. This proves existence, not a formula for the maximizing input.
Uniform continuity
Definition
One delta for the entire domain
A function is uniformly continuous on if for every there exists such that for all , implies . The chosen can depend on but not on or .
Theorem
Heine–Cantor theorem
Every continuous real-valued function on a compact set is uniformly continuous.
Proof
Contradiction using compactness
If uniform continuity failed, some would permit, for every , points with but . Compactness supplies a subsequence . Since the paired distances tend to zero, also . Continuity gives both and , contradicting the output separation.
Worked example
Pointwise but not uniform on an unbounded domain
The function is continuous on but not uniformly continuous there. Take and . Then , but . On any closed bounded interval, Heine–Cantor does give uniform continuity. It is also direct: if , then .
Proof
Why continuity suffices
A continuous function on a compact interval is uniformly continuous. Given and , choose so that points less than apart have output difference less than . A partition with mesh below has oscillation on every subinterval at most that bound, hence . The Darboux criterion yields integrability. For the integral is zero by convention.
Fermat's necessary condition. At a differentiable interior local maximum or minimum, .
Proof. At a local maximum, sufficiently small positive increments give nonpositive difference quotients and negative increments give nonnegative ones. A two-sided derivative can satisfy both sign limits only by being zero. Negating the function treats a minimum.
The interior hypothesis matters: on has extrema at endpoints despite derivative 1. The converse fails: has zero derivative at zero but no extremum there.
Rolle's theorem. If , is continuous on , differentiable on and , then for some .
Proof. The extreme-value theorem supplies maximum and minimum. If the function is constant, every interior point works. Otherwise a value differs from the equal endpoint values, so either a maximum or a minimum occurs in the interior. Fermat's condition applies there.
Mean value theorem. Under the same continuity and differentiability hypotheses but without equal endpoint values, some satisfies .
Subtract the secant line from and apply Rolle. This proves the theorem without assuming is continuous. Consequences include: derivative zero on an interval makes the function constant; nonnegative derivative makes it nondecreasing; and on an interval gives for points in it. An interval-wide derivative bound cannot be inferred from one derivative value.
4.5 Integrals as accumulated change
For , take a partition , with , tags , and mesh . A finite number is the definite integral if, for every , there is such that every partition with and every choice of tags satisfy . In that case is the common limit. Continuous functions on a closed interval are integrable.
Let be continuous on and . For and nonzero with , the integral estimate gives
Thus in the interior; at the endpoints the same argument gives one-sided derivatives. If is continuous on , differentiable on , and there, the mean value theorem makes constant on . Therefore .
For example, , and . The indefinite integral denotes a family of antiderivatives; a definite integral is a number. Negative rate values contribute negatively to a net accumulation.
Learning goals and setting
Read differentiability as linear approximation, handle zero inner increments in the chain rule, construct a differentiable function with discontinuous derivative, and state sufficient hypotheses for a local differentiable inverse. Unless an endpoint is explicitly mentioned, the function is defined on an open neighborhood of the point.
Differentiability at means a finite limit of the difference quotient. Equivalently,
Define the error quotient for nonzero and give it value zero at zero. This form is the precise content of a tangent approximation. It implies continuity by letting the increment tend to zero, but does not by itself supply a numerical error constant or a bound on the second derivative.
A vertical or one-sided infinite slope is not a finite derivative under this definition. At a domain endpoint, a one-sided derivative may be a separately named object; it must not be silently identified with an unavailable two-sided derivative.
1. A chain-rule proof that handles zero inner changes
Suppose is differentiable at , is differentiable at , and the nearby composition is defined. Write
with . Let . Continuity of ensures . Substitution gives
This proof never divides by , which may be zero for infinitely many increments. The familiar product of two difference quotients needs an extra case when its proposed denominator is zero; the error-function proof includes that case automatically.
For a quotient , the requirement plus continuity of gives a neighborhood where . Thus the quotient is locally defined and its derivative formula can be justified. Merely writing a squared denominator in the final answer does not prove this local domain fact.
10.4 Product, quotient and chain rules with hypotheses
If are differentiable at , then they are continuous there, and
One proof adds and subtracts in the difference of products, divides by , and uses the two derivative limits and continuity. If also , continuity keeps nonzero nearby, and applying the product rule to gives
For composition, suppose is differentiable at and at , with the composite defined on a neighborhood of . Then
A proof that does not divide by a possibly zero inner increment is useful. Differentiability gives
where define . Also with . Divide the composed increment by and substitute. The result tends to , even if for some nonzero .
11.3 A working antiderivative table
Each entry is checked by differentiation on the stated domain:
| Integrand | Antiderivative | Restriction |
|---|---|---|
| ; use for arbitrary real | ||
| an interval avoiding zero | ||
| all real | ||
The usual polynomial powers have their broader real domains. If in an exponential or cosine integrand, the integrand is and an antiderivative is ; a formula dividing by cannot handle that case. The sine integrand is then zero.